Altirigos - View Single Post - Dynamic Mass Storage Device Driver Injection during Mini Setup Failing

Brandon · 11-05-2008, 12:54 PM

After thinking about this more I wonder if you have the BMSD list run again in your template? Make sure it says BuildMassStorageSection = No or better yet don't have it at all.

I also read about having to move the iastor.sys file into the i386 folder and rename it to iastor.sy_ . Not sure why this would be required though.

EDIT: check this out, http://www.myitforum.com/forums/m.as...17&mpage=1&key=

The -PNP switch might be the trick!

I also saw this link about the critical DB prep (install.cmd) XP blue screening in AHCI mode before sysprep mini setup runs when imaging machine - Windows XP and Vista discussion - lenovo community

Hopefully -PNP can work around this.